[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index][Thread Index]
Print this message
Email this message
Go back
1965 electricals
- From: "Steve B." <Imperial59@xxxxxxxxxxxxxxx>
- Date: Tue, 1 May 2007 17:25:56 -0400
> I'm still trying to fix the electrical system on my 1965 Crown. My
> roommate
> hit the carb with a wrench and knocked out all the electrical system. I
> don't see anything around the carb that looks electrical. Any
> suggestions?
Hitting the carb has nothing to do with the electrical system. If his
action is what caused it then he hit something else and didn't realize it or
it was just an amazing coinkeydink,
Start at the battery and make sure the battery is fully charged and the
leads are clean and tight. I would remove them and clean them up and put
them back on. Also check the bulkhead connector where the wires go in to
the cabin from the underhood area. This connector can be troublesome. Much
of the wiring is on the driver side fender. My guess is you will find that
he leaned on something there to hit the carb and that is what killed it or I
could be all wrong. Either way you are going to need to get a voltage meter
and track the problem down.
Steve B.