[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index][Thread Index]
Print this message
Email this message
Go back
'62 Brake Line Questions
- From: Joe Strickland <jwstrick426@xxxxxxxxxxxx>
- Date: Mon, 20 Aug 2007 12:07:01 -0400 (EDT)
In the service manual for the '62 models it says "Double tubing should always
be used to insure long life and corrosion resistance." Does anyone know just
what "Double Tubing" means? I measured the OD of the existing OEM tubing and
it appears to be about 0.195 to 2.00 inches. Perhaps they mean double clad or
double plated (inside and out) tubing? Or do they mean double wall tubing?
It is close to time to replace the brake lines as I work on restoring the brake
system.
Thanks.
Joseph W. Strickland
1021 Vaughan Lane
Tioga, TX 76271-2937
________________________________________
PeoplePC Online
A better way to Internet
http://www.peoplepc.com