[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index][Thread Index]
Print this message
Email this message
Go back
inner fender removal 69
- From: Kenyon Wills <imperialist1960@xxxxxxxxx>
- Date: Tue, 28 Aug 2007 08:36:59 -0700 (PDT)
- DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.com; h=X-YMail-OSG:Received:Date:From:Subject:To:In-Reply-To:MIME-Version:Content-Type:Content-Transfer-Encoding:Message-ID; b=zyJV770C24WE4AdD85FSh3tPyBCfyivts0PVgi9SrElRnvI9PVs6yX3LNzqUAy2CYRnFznUsjwqxUE5A3KP5h0d1vDxV1yaYOAgE4oOrtnKi6T4opD6TzW0JzBJCgyhovi+rA50LXsDOKJN2smf9nM7Si+uGgyDb8aLrbwb9xs0=;
Have not tried on a 69.
The other cars' construction that I know from other
years would make this a real challenge. I don't think
that they saw you coming here and outer fender may
have to come off. I'm not there looking at it tho.
-K
--- Frederick Joslin <fljoslin@xxxxxxxx> wrote:
> I decided to remove the inner fender (PS) on my 69
> Lebaron Coupe. I want
> to change the heater hoses at the firewall, check
> out the blower motor
> and touch up the frame rail on that side and
> whatever else I see.
>
> I have removed the smaller panel to the outside of
> the vehicle and have
> removed all of the fasteners that I could find on
> the larger inner panel.
> This includes two stud/bolts at the very front under
> the horns that are
> accessed vertically from aboue. The panel is loose
> and I can rototate it
> axially, but it is hung up at the very front. It is
> difficult to see
> exactly what is going on and where it is hung up.
>
> Is there another fastener that I am missing? Is the
> inner fender
> designed to go on before the fender and not
> removeable with the fender in
> place?
>
> Thanks.
>
> Fred Joslin
>
Kenyon Wills