[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index][Thread Index]
Print this message
Email this message
Go back
|
I am currently working on replacing my sway
bar rubber bushings on my 58. I ahve all the rubbers however the FSM
says "the sway bar cushions are not serviced separately. If replacement is
necessary, install new sway bar assembly". On removal of this I have found
that there is a welded peice between the rubber bushing and were it clamps down
the strut bar. Has anyone replaced these on a 58 or have you replaced
the whole assembly as stated by the FSM.
Regards
Chris Wardle
58 Imp Crown
Coupe
|